As one of China vibrating feeders manufacturers,we are happy to share some key information about vibrating feeders with you.Vibrating feeders are usually used in the start stage of production lines and are widely used in industries such as metallurgy, coal mining, mineral processing, construction materials, chemistry, and wear-resistant materials. The BGFGF series vibrating feeder, delivers block or granular materials uniformly and continuously to the receiving equipment in the production line, which is one of key equipment to ensure high efficient and stable operation of the production line.  1.Basic specification   Model Feeder Size Max. Feed Size The length of Grizzly Bar Installation Angle(°) Amplitude Max. Capacity  Motor Power Working Speed Weight Transport Dimension LWH BGFGF1560 1500*6000mm 1000mm 2*1250 5(0-10) 8.5 800tph Electric  500-900rpm depends on selected configuration 6100*3650*2050mm BGFGF1040  1000*4000mm   2000*6000mm 650mm 1654 0 8 450tph Electric 450-1000rpm depends on selected configuration 4425*1800*1630mm BGFGF1260 1200*6000mm 800mm 2*1250 5(0-10) 8.5 500tph Electric 500-900rpm depends on selected configuration 6100*3350*2050mm BGFGF1360 1300*6000mm 900mm 2*1250 5(0-10) 8.5 600tph Electric 500-900rpm depends on selected configuration 6100*3450*2050mm BGFGF1860 1800*6000mm 1200mm 2*1250 5(0-10) 8.5 1000tph Electric 500-900rpm depends on selected configuration 6100*4250*2150mm BGFGF2060 2000*6000mm 1500mm 2*1250 5(0-10) 8.5 1500tph Electric 500-900rpm depends on selected configuration 6100*4450*2150mm     2. Highlights and advantages Mature exciter design  Amplitude of multiple size Vibrating feeders is adjustable, and its structure is simple, easy to maintain. Can adjust the amplitude by adjusting the number of eccentric blocks on the eccentric shaft in daily operation, so it is flexible to adapt to different sizes of feeding materials. Constant right feeding rate The optimization of the exciter position makes the amplitude of the whole feeder very uniform, while the excitation force is large and size is small.So the Vibrating Feeder machine runs stably, feeds material with a right feeding rate, and has high efficiency.   Low noise and low grease temperature Adopting lithium grease, filling in the middle of the bearings, the equipment gets more best and reliable lubrication, effectively reduces the grease temperature and noise, so that the bearings have a longer service life.      Easy operation The Vibrating feeder is easy to install and transport, can be quickly put into production, and convenient for daily operation and maintenance. The vibration frequency of the static vibrating feeder can be changed easily by adjusting the rotational speed through the frequency converter, preventing the motor from overheating, over current and overload.     For more information about Borgers' mobile screening equipment and services, please visit our official website or contact Borgers service team.

Regular lubrication of feeders is an important process of daily maintenance. Proper lubrication of feeders plays a key role to avoid malfunctions, reduce wear rate, and extend the service life of the feeders. Below 2 lubrication tips for Borgers feeders for your reference. 1.Select right oil and use proper oil consumption The daily maintenance of Borgers feeders requires lubrication oil, and we recommends using below oil with lithium or other similar models:  Brand Model BP Energrease LS-EP2 ESSO Beacon EP2 MOBIL Mobilux EP 2 SHELL Alvania Grease EP 2 SKF LGEP2   Lubricating oil consumption under different working conditions of equipment: Normal condition Lubricating oil consumption for each bearing(g) Dusty condition Lubricating oil consumption for each bearing(g) 150-200 50-70   *It's important to note: ① An appropriate lubricating oil consumption should occupy 30% - 50%  internal space of the bearing. Excessive lubricating oil will shorten the service life of bearings. ② Must not mix different brands of lubricating oil.   For main motor, our recommended lubricating oil is below: Brand NGL1-n°1 Mobil Polyrex EM   2.Pay attention to bearings and take care of them frequently In the daily operation of equipment, we need to regularly check the lubrication situation of  bearings, such as whether the bearings can rotate freely, whether the temperature is normal, or whether there is oil leakage, etc., to detect and solve potential problems in time, ensure the smooth operation of the bearings, and extend their service life. We need to pay attention to below 5 points. Find lubrication points of bearing accurately, According to different working conditions, lubrication must be done every 8 or 24 hours, The normal operating temperature range of bearings is 40-70 ℃, If the temperature is 75℃, please stop the equipment for inspection and maintenance, If there is a difference of 10-15℃between the bearings, please stop for inspection and maintenance. Take care of your feeders and other matching tracked jaw crushers or impact crushers or other equipment anytime, anywhere. For more information, you can contact your local dealer or Borgers service team.